Difference between revisions of "Seltzer Experiments"

From MKGFood
Jump to navigation Jump to search
(Created page with "Requirements: * Glass or metal only - no plastic, or very little plastic in touch with the liquid. Plastic touching gas or solids is more acceptable. * Cost should be lower in th...")
 
Line 11: Line 11:
 
* After acquiring equipment from [http://www.oakbarrel.com/ Oak Barrel Winecraft] set about figuring out the best method for pressurizing/dispensing.
 
* After acquiring equipment from [http://www.oakbarrel.com/ Oak Barrel Winecraft] set about figuring out the best method for pressurizing/dispensing.
 
** Oak Barrel salesperson described complicated method:
 
** Oak Barrel salesperson described complicated method:
### COLD water, fill corny keg with 2.5 gallons.
+
  # COLD water, fill corny keg with 2.5 gallons.
### Set regulator at 30 psi, quick connect to keg.
+
  # Set regulator at 30 psi, quick connect to keg.
### Roll and slosh keg around at 30 psi for 1 - 5 minutes.
+
  # Roll and slosh keg around at 30 psi for 1 - 5 minutes.
### Disconnect tank line, close tank and purge tank line with valve on regulator.
+
  # Disconnect tank line, close tank and purge tank line with valve on regulator.
### Purge pressure in keg with keg valve.
+
  # Purge pressure in keg with keg valve.
### Set regulator at 2 psi, quick connect to keg.
+
  # Set regulator at 2 psi, quick connect to keg.
### Dispense at 2 psi until keg is empty.
+
  # Dispense at 2 psi until keg is empty.
### Disconnect tank, close tank, purge tank line, purge keg with keg valve.
+
  # Disconnect tank, close tank, purge tank line, purge keg with keg valve.
### Repeat step 1 for new tank.
+
  # Repeat step 1 for new tank.
 
** MeFi user [http://www.metafilter.com/user/17535 pwb503] suggested a simpler method:
 
** MeFi user [http://www.metafilter.com/user/17535 pwb503] suggested a simpler method:
 
### COLD water, fill corny keg with 2.5 gallons.
 
### COLD water, fill corny keg with 2.5 gallons.

Revision as of 13:47, 12 July 2012

Requirements:

  • Glass or metal only - no plastic, or very little plastic in touch with the liquid. Plastic touching gas or solids is more acceptable.
  • Cost should be lower in the long run than either buying consumer bottles or siphon chargers or even SodaStream supplies if possible.
  • Keep seltzer cold if possible.

Research:

  • Explored existing systems and settled on using home brewing equipment.
    • Cost is similar in initial outlay to Penguin Sodastream
    • Long-term costs are much cheaper. Costs $15 - $20 to refill/exchange a sodastream 60L cartridge. Costs $15 - $20 to refill a 5 lb CO2 tank (Produces ~600 gallons of seltzer depending on usage patterns)
    • See Ask Metafilter question and answers for more details
  • After acquiring equipment from Oak Barrel Winecraft set about figuring out the best method for pressurizing/dispensing.
    • Oak Barrel salesperson described complicated method:
 # COLD water, fill corny keg with 2.5 gallons.
 # Set regulator at 30 psi, quick connect to keg.
 # Roll and slosh keg around at 30 psi for 1 - 5 minutes.
 # Disconnect tank line, close tank and purge tank line with valve on regulator.
 # Purge pressure in keg with keg valve.
 # Set regulator at 2 psi, quick connect to keg.
 # Dispense at 2 psi until keg is empty.
 # Disconnect tank, close tank, purge tank line, purge keg with keg valve.
 # Repeat step 1 for new tank.
    • MeFi user pwb503 suggested a simpler method:
      1. COLD water, fill corny keg with 2.5 gallons.
      2. Set regulator at 60 psi, quick connect to keg.
      3. Roll and slosh keg around at 60 psi for 1 - 5 minutes.
      4. Disconnect tank line
      5. Store keg in fridge to keep cold
      6. Attach tap and dispense at 60 psi of initial charge.
      7. Let sit to equilibrate and maximize bubbliness/taste.
      8. Recharge with relatively high pressure if the keg does not empty with initial charge.
    • MeFi user ttrendel suggested method more like Oak Barrel, but dispensing at 30 psi.
    • Discussion with pwb503 indicates that experimentation is probably necessary to get the right behavior I want.
    • Note-taking and experimentation on Google Drive spreadsheet